What’s inside the box, and how to look after it.
SQUVA is engineered to last for thousands of cycles in a busy practice. Here is what you receive, the technical specification, and the simple care that keeps it running like new.
SQUVA, at a glance.
A compact countertop unit. The chamber on the left holds the implant in its sterile carrier. The 5″ touch screen on the right runs the cycle. The motion sensor, voice assistant and 172 µm UV lamp module are concealed inside the housing.
- Motion sensor — sterile-field friendly lid
- Voice assistant — multi-language audio prompts
- 10 s · 172 µm UV — fixed therapeutic cycle
- 5″ LCD touch screen — single-tap operation
- Open system — works with any major implant brand
Three pieces, every SQUVA system.
The chair-side device, the surgical fixture driver kit, and the RFID activation card — together they unlock photofunctionalisation in your practice.
Every part of the SQUVA system
SQUVA main unit
UV chamber, motion-sensor lid, 5″ LCD touch screen, voice assistant — the whole device.
Implant cradle
Adapts to any major manufacturer’s carrier so any geometry sits centred under the lamps.
UV lamp module
Replaceable lamp unit. The screen tracks lifetime cycles and prompts replacement well before exhaustion.
Power supply & cable
Universal medical-grade power adapter (100–240 V, 50/60 Hz). Region-specific cable supplied.
Operator manual
Quick-reference card and full A4 manual. Also available as a PDF download.
Cleaning kit
Lint-free wipes and approved cleaning solution for daily and weekly maintenance.
Dust cover
Soft cover for overnight protection in dusty environments.
Warranty & QC card
Serial-tracked QC and warranty registration card. Activate online or by phone.
Technical detail
Everything you’d ask before you buy — on one page. Specifications are subject to change without notice.
| Cycle time | 10 seconds (fixed) |
| UV characteristic | 172 µm UV emission, controlled chamber irradiation |
| Compatibility | Open system — fits implants from all major manufacturers |
| Display | 5″ LCD capacitive touch screen |
| User interface | Touch screen + motion-sensor lid + voice assistant |
| Audio | Multi-language voice prompts |
| Power | 100–240 V AC, 50/60 Hz universal input |
| Indicators | Cycle counter, lamp life, error states on screen |
| Safety | Lid interlock, UV containment housing, automatic cooldown |
| Manufacturer | DENTIS CO., Ltd. — Optical Science Institute |
Designed for the dental team
Daily wipe-down
At the end of every list, wipe the chamber and cradle with a lint-free cloth and 70% IPA. Allow to dry before powering off.
Weekly check
Inspect the lid hinge, motion sensor window and cable connector. Tighten or clean as required.
Lamp replacement
The lamp module is user-replaceable. The screen prompts ahead of expiry. See the manual for the swap procedure.
Sterilisation
SQUVA is a UV photofunctionalisation device. The implant inside it is already sterile-packed by its manufacturer; SQUVA does not replace autoclave sterilisation of surgical instruments.
Workspace placement
Place on a flat, dry surface on the surgical countertop or trolley. Allow ~10 cm clearance behind for ventilation.
Sterile field
The motion-sensor lid is intentional — gloved hands never need to touch the housing. The chamber is the only contact surface.
Full catalog & clinical evidence.
Detailed sections, components, accessories, order codes — and the supporting clinical study.